RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 65mm 3/8" Nominal Fixture Tolerance: Power: Not

Nominal Fixture Tolerance: Power: Not applicable

Customized pre-set torque screwdriver with Rapidaptor quick-release chuck

See related items tab for stainless steel replacement needles for use with this dispenser

5 mm) 2140-30 BluGuard Engineer's hammer 2140-50 BluGuard Engineer's hammer 428-6 Nut-driver ∙ with T-handle Outside hexagon profile ∙ 6 mm 428-7 Nut-driver ∙ with T-handle Outside hexagon profile ∙ 7 mm 428-8 Nut-driver ∙ with T-handle Outside hexagon profile ∙ 8 mm 428-10 Nut-driver ∙ with T-handle Outside hexagon profile ∙ 10 mm 428-11 Nut-driver ∙ with T-handle Outside hexagon profile ∙ 11 mm 428-13 Nut-driver ∙ with T-handle Outside hexagon profile ∙ 13 mm 600N-8 Combination wrench Outside 12-point traction profile ∙ 8 mm 600N-9 Combination wrench Outside 12-point traction profile ∙ 9 mm 600N-10 Combination wrench Outside 12-point traction profile ∙ 10 mm 600N-11 Combination wrench Outside 12-point traction profile ∙ 11 mm 600N-12 Combination wrench Outside 12-point traction profile ∙ 12 mm 600N-13 Combination wrench Outside 12-point traction profile ∙ 13 mm 600N-14 Combination wrench Outside 12-point traction profile ∙ 14 mm 600N-15 Combination wrench Outside 12-point traction profile ∙ 15 mm 600N-17 Combination wrench Outside 12-point traction profile ∙ 17 mm 600N-19 Combination wrench Outside 12-point traction profile ∙ 19 mm 600N-22 Combination wrench Outside 12-point traction profile ∙ 22 mm 600N-24 Combination wrench Outside 12-point traction profile ∙ 24 mm 745A-6 Drift punch 6 mm 746-1 Centre punch 4 mm 799-3 Lever for removing door panels 801NK-55 Screwdriver Slot profile ∙ 1 x 5

With screw for gauge depth adjustment (*)

RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 65mm 3/8" Nominal Fixture Tolerance: Power: NotOverview The fine toothing is particularly suitable for cutting metals. It ensures smoother running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non alloyed steels (up to 1. 000 N mm strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non ferrous and light metals. The RUKO bi metal hole