Autonics Photoelectric Sensor, Photoelectric Type BJR15M-TDT-W-P Series_29^2200 Please feel the difference between

Please feel the difference between steel and finish

Wire type and power DC 3-wire type 12-24VDC  Sensing side size Frame size 50mm Sensing distance 30mm Standard sensing target 90×90×1mm(iron) Response frequency 50Hz Current specification Current consumption: Max

Double Shielded

Mitutoyo 2046S

415 V AC 50/60 Hz conforming to EN/IEC 60947-225 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-210 kA Icu at <= 125 V DC conforming to EN/IEC 60947-2 Utilisation category Category A conforming to EN 60947-2Category A conforming to IEC 60947-2 Suitability for isolation Yes conforming to EN 60898-1Yes conforming to EN 60947-2Yes conforming to IEC 60898-1Yes conforming to IEC 60947-2 Standards EN 60898-1IEC 60947-2EN 60947-2IEC 60898-1 Quality labels NF Complementary Network frequency 50/60 Hz Magnetic tripping limit 8 x In +/- 20 % [Ics] rated service breaking capacity 50 kA 100 % conforming to EN 60947-2 - 220

Autonics Photoelectric Sensor, Photoelectric Type BJR15M-TDT-W-P Series_29^2200 Please feel the difference betweenOil resistant oil proof Oil resistant type Sensing type Through beam type Sensing distance 15m Sensing target Opaque material of min. 12mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10 30VDC 10%(ripple P P: max. 10%) Current consumption Emitter Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by switch) Control output PNP open collector Connection type 4mm, 3 wire, 300mm