Metcal DCP Desoldering Tip Standard Length (∅ x L) 0.76x5.42mm DCP-CN3 vendor_LINDSTROM Continuously monitors 2 operator dual-wire

Continuously monitors 2 operator dual-wire wrist straps and 1 worksurface mat

Viewer PC software expands data storage and tracking capacity and can import Fluke thermal images

updates 4/sec Operating temperature -10°C to 50°C (14°F to 122°F) Storage temperature -40°C to 60°C (-22°F to 140°F) Temperature coefficient 0

with very fine tips

75X for clear viewing of close up work

Metcal DCP Desoldering Tip Standard Length (∅ x L) 0.76x5.42mm DCP-CN3 vendor_LINDSTROM Continuously monitors 2 operator dual-wireOverview DxP Desolder Tips are the standard desoldering tip range for the Metcal desolder series MFR 1150, MFR 1350, MFR 1351 and MFR UK5. The second letter in the part number designates the temperature series. The temperature series DFP are nominally 390 C. Metcal recommends the DFP series for most applications. The Temperature series DCP are nominally 450 C and are recommended for high temperature and thermally demanding applications. Can be used